Film-Tech Forum ARCHIVE: DTS subwoofer to USL JS105/195

This is topic DTS subwoofer to USL JS105/195 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010734

Posted by David E. Nedrow (Member # 4981) on 12-02-2010, 11:53 PM:

Does anyone know how to connect the subwoofer output of the XD-10, to a USL processor without a sub input on the EXT/MAG connector?

Posted by Gordon McLeod (Member # 33) on 12-04-2010, 12:29 PM:

If it has the 6 track format card you solder on to the edgestrip pin of the format card it is in the DTS 6d book

Posted by David E. Nedrow (Member # 4981) on 12-04-2010, 10:45 PM:

Gordon,

Thanks much. I wonder why DTS doesn't include this diagram, with the subwoofer detail, in the XD-10 manual.

-David

Posted by David E. Nedrow (Member # 4981) on 12-05-2010, 01:52 PM:

Just to follow up, soldering the XD-10 sub output to the specified connector pin worked.

I just noticed in the XD-10 manual that there is a footnote at the bottom of the JS diagram directing the consumer to DTS for hook-up information. Maybe too many people were getting solder all over their processor. Or, they didn't like the really sloppy lines drawn on the DTS-6D diagram. [Wink]

For anyone who might run across this issue, see page 47 of the DTS-6D manual.