Film-Tech Forum ARCHIVE: CP500 output connectors

This is topic CP500 output connectors in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010903

Posted by Matthew Taylor (Member # 2310) on 05-16-2011, 04:29 PM:

I have obtained a CP500 that hasn't come with any cables. I need to make up a cable for conecting the cp500 to my amplifiers but I need to know what the type of connectors they are on the back so I can order some plugs for it. I'm talking about the green ones for output and crossover. Can someone tell me what the name of them is?

Thanks.

Posted by Tony Bandiera Jr (Member # 2365) on 05-16-2011, 06:48 PM:

They are called Phoenix connectors and IIRC the pitch (spacing) between each terminal is 5mm.

Dolby UK can get them for you and they are not expensive.

Posted by Gordon McLeod (Member # 33) on 05-16-2011, 08:56 PM:

Newark also carries them as does digikey

Posted by Marin Zorica (Member # 1716) on 05-17-2011, 02:17 AM:

Also I did found them in many electronic shops, also you can use two pole type and just plug six of them.