Film-Tech Forum ARCHIVE: CP65 Fanning Strips

This is topic CP65 Fanning Strips in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010907

Posted by Jeremy Weigel (Member # 4208) on 05-18-2011, 09:45 AM:

I need the part# for the CP-65 TB3 (audio output to amps) fanning strip. Is there another source other than Dolby to get these?

Posted by Louis Bornwasser (Member # 3063) on 05-18-2011, 10:31 AM:

I have even had old time Dolby employees call and ask for these. I have had no success ever in the USA. I think Radio Spares in the UK was the original source.

On a brighter note: I do have a limited stock here at Hadden. Email me. Louis

Posted by Stephen Furley (Member # 1277) on 05-18-2011, 03:47 PM:

RS Components, they used to be Radiospares many years ago, used to sell them, but I can't find them on the website now. They are listed on the website of Cinch, who I think actually made them, in many different versions, but with almost all shown as discontinued.

Posted by Ian Parfrey (Member # 5122) on 05-18-2011, 04:26 PM:

Have a bash at these blokes.

RS Components Australia

Posted by Sam D. Chavez (Member # 1841) on 05-18-2011, 07:10 PM:

Odyssey in Atlanta makes some cool ones based on a thin PC board. Very cool!

I stock them here as well. Also hinges, door latches, some real obscure stuff.

OK, sorry for the shameless plug.

The trouble with old Dolby fanning strips is some have an oxidation problem and this makes it hard for solder to stick.