Film-Tech Forum ARCHIVE: Roller Assembly Help

This is topic Roller Assembly Help in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010943

Posted by Paul Looker (Member # 5420) on 06-17-2011, 04:28 PM:

I need to make a couple of these:

I'm a bit of a noob when it comes to stuff like this so I really don't know where to begin at all. If someone could help me out I would really appreciate it.

Here's a look from the side:

The Other side:

And the back:

Can anyone point me in the right and preferably relatively affordable direction?

You guys are the best,
Paul

Posted by James Westbrook (Member # 3690) on 06-17-2011, 07:32 PM:

The red and white rollers are from Speco. The rest of that assembly, I have not a clue. Speco may have made it, or someone else assembled that using the Speco rollers.
I'm not sure if Speco is still around. With mass conversion to digital, there should be scores of those rollers available.

Posted by Steve Guttag (Member # 268) on 06-18-2011, 12:02 PM:

The whole assembly is from SPECO. We probably have some in stock.

Posted by Paul Looker (Member # 5420) on 06-18-2011, 01:25 PM:

Steve, what company are you with? Would you have three of those full assemblies in stock? If so could I have a contact number to discuss price and ordering?

Posted by Steve Guttag (Member # 268) on 06-18-2011, 02:00 PM:

I work for Cardinal Sound & Motion Picture Systems... (Elkridge, MD). I can check on Monday how many we have.

-Steve

Posted by Paul Looker (Member # 5420) on 06-24-2011, 09:56 PM:

Just checking back to see if you had come across anything Steve. If not this particular model assembly do you know of something similar?