Film-Tech Forum ARCHIVE: Info needed on Kinoton FP30D automation

This is topic Info needed on Kinoton FP30D automation in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010989

Posted by Matthew Taylor (Member # 2310) on 08-10-2011, 03:23 PM:

I have a Kinoton FP30D circa 2002. It appears, from the programmable logic controller inside, that it has built in automation. Can anyone tell me how to program it? There is a separate remote control box that has a display and the projector control buttons but the serial cable that connects to the projector has been cut. I've replaced the connections but nothing appears on the display.
The Kinoton manual I have must be a bit older than the projector because the equipment inside the machine does not look the same.
Can anyone tell me how to use the automation?

Thanks.