Film-Tech Forum ARCHIVE: Music Bleed over

This is topic Music Bleed over in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011049

Posted by Robert Carnino (Member # 5633) on 10-09-2011, 05:15 PM:

I have a Smart DA226 music distribution system that haven't been hooked up in years. I've been work on getting set back up but I have music bleeding over onto the movie in on of my theatres. What causes this and how do I fix it?

Thanks

Posted by Gordon McLeod (Member # 33) on 10-09-2011, 06:31 PM:

Well the DA isn't the fault but most likely a bad ground issue or a problem in the non sync fader of the processor
What make of processor do you have in the case of the Smart Mod2 serries processors setting the right ratio of input to gain controls on the output card can cause bleedthrough
The vca in the nonsync fader only has a limited range of attinuation