Film-Tech Forum ARCHIVE: Spade crimp terminals.

This is topic Spade crimp terminals. in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011114

Posted by Richard May (Member # 2627) on 12-21-2011, 11:31 AM:

I can't believe I'm having so much trouble finding these. I'm looking for a red spade crimp for 18-22g wire and #2 stud. Anyone have a source?

Also, on another note, does anyone know the stud size for QSC input barrier strips?

Posted by Frank Cox (Member # 6258) on 12-21-2011, 12:50 PM:

For crimp-on terminals, try an auto parts supply or a farmers supply store.

The last time I bought crimp-on terminals I got them from Acklands, but that won't do you any good there.

Posted by Louis Bornwasser (Member # 3063) on 12-21-2011, 12:52 PM:

Any good hardware store; avoid big box stores. Louis

Posted by Mitchell Dvoskin (Member # 751) on 12-21-2011, 01:07 PM:

Last I bought these, I stopped at Wayne Electronics just down the road from my house.

There must be electronics parts stores in NY, or online.

Posted by Gordon McLeod (Member # 33) on 12-21-2011, 02:16 PM:

hmm i think the problem is that a #2 stud may not be supported in a red there is a small yellow spade from amp that supports 20-24awg
try newark or digikey

Posted by Richard Hamilton (Member # 321) on 12-21-2011, 03:02 PM:

give these guys a call. They always helped me and would look up what I needed if they didn't stock it.

Posted by Rick Raskin (Member # 1561) on 12-21-2011, 04:11 PM:

Try Allied Electronics

AMP; TERMINAL; SPADE TONGUE; 22-16AWG; RED; STUD SIZE 2
Mfr. Part#: 328394
Allied Stock#: 512-4485

Posted by Richard May (Member # 2627) on 12-21-2011, 04:24 PM:

Thanks everyone. I got them at Allied.