Film-Tech Forum ARCHIVE: Dolby Cat 240A problems

This is topic Dolby Cat 240A problems in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011164

Posted by Mike Moreno (Member # 4887) on 02-17-2012, 12:50 PM:

hi everyone.
Im having problems with the Cat 240A in a CP65, it does not send audio.
My question is that if the projector 2 connection is independent from projector 1 so I can change the solar cell in projector 2 and also if It switches alone or I have to move some DIP switch.
Thanks.

Posted by Sam D. Chavez (Member # 1841) on 02-17-2012, 01:14 PM:

You nave to move the wires to projector 2.

Projector 2 is mostly different but not totally independent.

You need to move the wires and see if it works.

Both the left and right channels are bad on the 240A?

It is possible it is the reader or solar cell.

Posted by Tony Bandiera Jr (Member # 2365) on 02-18-2012, 12:47 AM:

Also, you need to jumper the "c/o" terminal on the backplane to an "E" terminal to select Proj. 2