Film-Tech Forum ARCHIVE: CP650 remote connector part #

This is topic CP650 remote connector part # in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011268

Posted by Scott Norwood (Member # 30) on 07-07-2012, 08:48 PM:

Subject pretty much says it. I'm looking for a part number for the mating Phoenix connector for the remote input on the CP650. Preferably a generic part, not some super-expensive Dolby part.

Thanks.

Posted by Tony Bandiera Jr (Member # 2365) on 07-07-2012, 09:16 PM:

Scott, it is a standard 5mm pitch Phoenix connector, Mouser and Digi-Key both sell them cheap. You do not need the "Green" plastic one which allegedly is "EMI/RFI" special. I am too lazy and tired to look up part numbers for you..just search those sites with the number of positions and the pitch and you'll find them.

Posted by Scott Norwood (Member # 30) on 07-08-2012, 09:31 AM:

Ah-ha. The thing that I ordered was Digi-Key part #277-1906-ND, which has a narrower pitch. I had naively assumed that all Phoenix connectors were the same, except for the number of positions.

It looks as if the thing that I actually need is 277-1004-ND aka Phoenix part #1754520.

Thanks!