Film-Tech Forum ARCHIVE: Cp500 fade in when non sync selected??

This is topic Cp500 fade in when non sync selected?? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011279

Posted by Steven Cutting (Member # 5803) on 07-21-2012, 11:04 PM:

Hello,
I have a CP500. When i select Non sync to play music after the film the sound comes in instantly at normal volume. Is there some way of changing this Setting so that it fades in slowly? If I mute and then select non sync with that delay set at 5 it is a little better but not much?

Thanks...

Posted by Marco Giustini (Member # 4544) on 07-22-2012, 05:18 AM:

Hi,

If I remember correctly, the mute speed adjustmenent was for fade-out only. Fade-in is always instantaneous.

Posted by Steven Cutting (Member # 5803) on 07-22-2012, 07:34 AM:

Thats a shame, my old cp50 would fade in and out well. I guess I will have to set the non sync level to 1 and bring the volume up manualy.

Thanks Marco.

Posted by Louis Bornwasser (Member # 3063) on 07-22-2012, 09:47 AM:

I believe that there was a software upgrade that addresses this problem. This was not a Dolby thing.

If memory serves, the changs originate from Bell Theatre services, london. louis

Posted by Marco Giustini (Member # 4544) on 07-22-2012, 11:15 AM:

a CP500 upgrade from BTS?

Posted by Steven Cutting (Member # 5803) on 07-23-2012, 05:57 PM:

Thanks Louis,
I found their web address. I'll send them an email and ask.