Film-Tech Forum ARCHIVE: Mounting Film Cleaner

This is topic Mounting Film Cleaner in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011282

Posted by Harry Robinson (Member # 265) on 07-26-2012, 11:11 PM:

I'd like to mount my Kelmar Flim Cleaner on my rewind table, also Kelmar. There is a place for a frame counter already there. Any suggestions? Head room on the projector is limited and I just got a Dolby reader, so the cleaner has to move.

Posted by Monte L Fullmer (Member # 2797) on 07-27-2012, 03:25 AM:

I've seen newer model Kelmar tables that have a hole right about the speed control unit where an optional bracket goes there to mount a Kelmar bracket on this optional bracket for bench cleaning.

Might have to check if your table doesn't have this mount hole, if a hole can be drilled to mount such a bracket...

Posted by Chris Slycord (Member # 4239) on 07-27-2012, 04:24 PM:

http://www.film-tech.com/cgi-bin/ubb/f1/t005596/p2.html

http://www.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=003550;p=2#000020

Both have pictures of how it was done.

The first one uses wood to attach the regular kelmar cleaner bracket and the second attaches it to the kelmar film-counter bracket in practically the same way.