Film-Tech Forum ARCHIVE: System Update Disc V2.40.24

This is topic System Update Disc V2.40.24 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011340

Posted by Shawn Arndt (Member # 7159) on 11-14-2012, 11:58 AM:

Does anyone have this for the DTS-6D upgrade? I bought an older 6D and need it for the upgrade. New SCSI board is installed but I do not have access nor have I found anyone that has this disc.

Cheers and Thanks in advance.

[Smile]

Posted by Marco Giustini (Member # 4544) on 11-14-2012, 04:05 PM:

That sounds like a DTS XD10 upgrade, not 6D. You do not need software for the 6D, it comes with every DTS disk.
You may need the latest eeprom on the timecode board, but no software is required.

Posted by Shawn Arndt (Member # 7159) on 11-14-2012, 04:12 PM:

I do have the V1.46 eeprom ..... so what you're saying is the machine should not need the software update?

Posted by Chris Slycord (Member # 4239) on 11-15-2012, 08:31 PM:

quote:
The current software for the DTS-6D is V1.46 on U14 D422 timecode card. If a software update is needed, contact techsupport@datasat.com

Taken from datasat's website.

Posted by Marco Giustini (Member # 4544) on 11-17-2012, 04:20 AM:

Definitely no sw update is required, the DTS6/6D are very basic machines and the "software" they run is run at every boot from the CDROM - if you stick one in your PC you will find a DTS.EXE file.
If you have replaced the SCSI board and the system is working well, there is nothing else to be done.
The DTS note is about the 1.46 timecode chip. If you already have it you're ok.

Posted by Shawn Arndt (Member # 7159) on 11-17-2012, 11:49 AM:

Cool. Thanks for all the responses here. It is appreciated.

[Smile]