Film-Tech Forum ARCHIVE: Non Sync problem on CP750.

This is topic Non Sync problem on CP750. in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011623

Posted by Allan Riddelll (Member # 5090) on 03-13-2014, 08:22 AM:

I would like to have my non sync a tad higher in one of my auditoriums. Level 7 is not quite high enough but my Doremi server is programmed between 4 and 7 on the editor. Is there any way to raise the pre amp for non sync only on the 750.

Posted by Steve Guttag (Member # 268) on 03-13-2014, 09:12 AM:

Yes...you'll need the set up software but there is a trim for the Non-Sync input.

Posted by Jim Cassedy (Member # 4115) on 03-13-2014, 10:45 AM:

^^^^ What Steve said. ^ ^ ^ ^ ^

Here's an actual photo (WoW!) I made awhile back when trying to explain how to raise
the non-sync level to someone else.

You'll need the CP-750 set-up program, and then, using the tabs at the top of the page
navigate to [Input Settings] and [Non Sync], where you'll see a screen that looks like this:

(Image slightly re-formatted to fit this screen better, but this is basically what U R looking for)