Film-Tech Forum ARCHIVE: Kinoton Lamphouse Alignment Tool Operating Voltage?

This is topic Kinoton Lamphouse Alignment Tool Operating Voltage? in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011669

Posted by Mark Gulbrandsen (Member # 72) on 06-16-2014, 03:53 PM:

I dug out my Kinoton Lamphouse Alignment Tool today but can't seem to find the power supply for it. It uses a common DC wall wort but I'm not sure of the voltage or the polarity. If one of you guys has one out there and could measure the adaptor output and polarity I'd be most grateful so I can use mine.

Thanks!

Posted by Mark Gulbrandsen (Member # 72) on 06-16-2014, 07:12 PM:

Disregard this. I finally found it after a long search... The adaptor is six volts dc 2.1 amps and the center pin is negative....