This is topic Vic 5 analogue board pin out in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011696
Posted by Jonathan Wood (Member # 4614) on 08-14-2014, 10:04 AM:
Hi ,
Does anyone know which pins are which on the 6 pin audio out on the basement analogue reader board? Need to make up a cable. Would it be the same as on a Kinoton dual reader as the boards look pretty much the same ? As always any advice gratefully received ! ![[Smile]](smile.gif)
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2