Film-Tech Forum ARCHIVE: dolby cp500 un implemented

This is topic dolby cp500 un implemented in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011870

Posted by Boonchoo Dungsuvan (Member # 8020) on 09-03-2015, 09:04 AM:

dolby cp500 un implemented exception
I am upgrading cp500
But the scene of a power outage
And Cp500 my show for un implemented exception.
What do I have to do
Help me
Thank You

Posted by Stephan Shelley (Member # 8587) on 09-03-2015, 07:51 PM:

You had a power outage during the upgrade? Ouch. If you can still can communicate with it try running the upgrade again. If not you will need a replacement control board. Contact Bay Area Cinema Products they should have some good used ones.

Posted by Steve Guttag (Member # 268) on 09-03-2015, 09:56 PM:

All you should really need are the chips (plug in)...if a CP500 goes dead on an upgrade...then that is about your only solution. However, I suppose a whole board would work too. I'd think that shipping internationally that one would want to keep the shipment as small and low-cost as possible.

Posted by Boonchoo Dungsuvan (Member # 8020) on 09-04-2015, 05:21 AM:

Which software The upgrades of the original.

Posted by Stephan Shelley (Member # 8587) on 09-04-2015, 07:58 PM:

Try redoing the one that got interrupted by the power outage.

Posted by Boonchoo Dungsuvan (Member # 8020) on 09-05-2015, 12:54 AM:

I use software LOAD500 and it is not connected to comport.
And I have to do?

Posted by Stephan Shelley (Member # 8587) on 09-05-2015, 02:44 PM:

Your cat 684 system control board is dead. Bay area cinema products has good used ones and possible could send the chips. There is an email link at the bottom of the home page.

http://www.bacpinc.com/

Posted by Boonchoo Dungsuvan (Member # 8020) on 09-05-2015, 10:20 PM:

Instructions on how to fix the other cp500? Thanks.

Posted by Stephan Shelley (Member # 8587) on 09-06-2015, 04:37 PM:

Sorry didn't realize we were talking about two units. What specificaly is the issue with the second?

Posted by Boonchoo Dungsuvan (Member # 8020) on 09-06-2015, 08:42 PM:

Sorry.
My English is not good
Choice is to fix
For example, lead to the FLASH Memory Chip board or other Choice ...
Thank You

Posted by Boonchoo Dungsuvan (Member # 8020) on 09-08-2015, 09:25 AM:

I want Eeprom CP500
Send by mail
Thank You