Film-Tech Forum ARCHIVE: Strong 6200000 Series V2

This is topic Strong 6200000 Series V2 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=011961

Posted by David Kankainen (Member # 9357) on 03-17-2016, 05:33 PM:

I have this power supply, Single phase rated at 20-30 volts,and
25-95 amps. I have tested it by putting jumper between #2 and 5,
and another jumper between 4 and 6. The green go lamp lights up,
and there is close to 200v DC measured at the output lugs.
I also have Ballantyne DC igniter 1-7K Part No 39862000. It would appear that the Large lugs would go in series with the Xenon lamp,
but there is no polarity markings on the igniter lugs.
Note this will power a search light.
Any insight in this whold be greatly appreciated.

Thanks Dave [Smile]