Film-Tech Forum ARCHIVE: USL JSX1000 - Picture of Backplane / Main Audio Out

This is topic USL JSX1000 - Picture of Backplane / Main Audio Out in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012082

Posted by Sascha F. Roll (Member # 9043) on 10-31-2016, 04:16 PM:

Next week I'm at a site where we are going to feed the existing JSX1000 (extremely rare in germany!) into the 8 Channel analog input of a JSD-100.

As I'm preparing the cables now I'm curious if someone here could provide a picture of the JSX backplane, specially the Main Audio Output.

Thanks and best regards from Berlin,
Sascha

Posted by Lindsay Morris (Member # 1430) on 11-01-2016, 04:11 AM:

Sascha,

Not sure if the JSX1000 & 1000A are exactly the same but on my 1000A all the rear backplane connections are via screw terminals.
So you simply take your pick of what you want as they are all clearly marked.
You can use lugs on the ends of your cables or with care simply pop under the screw head & tighten up which is probably the way to go for a temporary lash up. [Smile]

Lindsay