Film-Tech Forum ARCHIVE: Maintenance advice, ELMO CX-350

This is topic Maintenance advice, ELMO CX-350 in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012100

Posted by Carl Schrecongost (Member # 9119) on 01-19-2017, 09:36 AM:

I am tasked with keeping an ELMO CX-350 in decent running condition. My skills are barely adequate, I'm able to keep the film path clean and change lamps.

I recently brought a back-up CX-350 out of storage. I would like to perform some lubrication, it has been years since the projector has been run.

This copy of the service manual: http://www.film-tech.com/warehouse/manuals/ELMOCX350.pdf
references a section in the table of contents: "VII Test film, oil and grease page 109"

Sadly, the document appears to cut off at page 106.

If anyone has memory of key places to oil this machine, I would be very grateful.

Thank you for your time