This is topic FP20 Motor in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.


To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012145

---

Posted by Steve McAndrew (Member # 8865) on 05-22-2017, 02:13 PM:
 
I have an old Philips/Norelco FP20 that I am about to start rewiring. Can the existing motor (WKM 120-40) be powered from a modern AC motor drive?

Alternatively is it possible to fit a modern FP20 Motor onto the old intermittent unit?

Thanks
 

---

Powered by Infopop Corporation
UBB.classic^TM 6.3.1.2