Film-Tech Forum ARCHIVE: Cinemeccanica power rewinder assistance

This is topic Cinemeccanica power rewinder assistance in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012236

Posted by Ian Griggs (Member # 9542) on 12-12-2017, 10:25 PM:

Yes, here I am with another Cannica question.
I have the power rewinder. It had all three switches broken, but they are replaced now. There are two large resistors at one end of the board. See photo. One has been burnt and I am loathe to apply power to this unit if the faulty resistor will cause issues on the circuit. Question: does anyone have the circuit diagram for this winder (in USA read "schematic")? Otherwise you could please tell me exactly what the values are, so I can at least replace it/them.

Posted by Allan Lyman (Member # 9449) on 12-18-2017, 10:16 AM:

Hello Ian

pm me,I might have the correct schematic
Alan