Film-Tech Forum ARCHIVE: CP200 no front display

This is topic CP200 no front display in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012309

Posted by Markus Lemm (Member # 3456) on 05-17-2018, 02:50 PM:

I have a CP200 that has been in storage for many years that was just installed. After giving it power we get no lights on control unit. Only when I turn the normal operation knob to 'remote projector 1' does a system emergency light blink.
I know the units were taken out of a working cinema.

Any help would be appreciated.

Thanks,

Posted by Steve Guttag (Member # 268) on 05-17-2018, 04:44 PM:

Do you have all of the power cables plugged in correctly (the right ones plugged in the right places)? Also note, there are some some power cables that are missing one of the wires (I think delayed 24V).

Make sure all ribbon cables are plugged in right.

Posted by Markus Lemm (Member # 3456) on 05-17-2018, 05:37 PM:

Thanks. Got it. Didn't realise that some of the cables have different amounts of wires in them. It is working now.