Film-Tech Forum ARCHIVE: Ernemann 15

This is topic Ernemann 15 - Compatible lamps in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012381

Posted by Andy Jenkin (Member # 8332) on 12-08-2018, 04:03 PM:

Hi all,

I have one of the above with a 2kW lamphouse and rectifier, so naturally I'm looking for a 2kW lamp for it. However most of those I find do not have the correct fitting, can anyone offer any advice on what exactly I should be looking for?

I've used it with a 1.6kW lamp before, but even at the rectifier's lowest output, the lamphouse was reading 72-73 amps, which I think is pushing it for a 1.6kW lamp. It ran fine for four feature films however.

Some pictures of the lamp mount in the lamphouse are attached.

Any help greatly appreciated!

Thanks,

Andy

Posted by Sascha F. Roll (Member # 9043) on 12-08-2018, 04:30 PM:

I‘m using the following lamps in my Kinoton and Ernemann 2000W lamphouses:

https://www.osram.de/appsj/pdc/pdf.do?cid=GPS01_1028548&vid=PP_EUROPE_DE_eCat&lid=DE&mpid=ZMP_55864

Posted by Peter Hall (Member # 695) on 12-09-2018, 08:24 AM:

Yep, with the thread you need a 2kshsc or 1.6 or 1k

Posted by Andy Jenkin (Member # 8332) on 12-09-2018, 09:56 AM:

Thanks both, the SHSC is the bit I needed!