Film-Tech Forum ARCHIVE: XD10 subw level

This is topic XD10 subw level in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012405

Posted by Allan Lyman (Member # 9449) on 02-23-2019, 04:36 AM:

I am not sure if this has been asked before.
But with introduction of SMPTE2000,the subw.level on DTS was reduced in recording and we had to raise the output in the theathres from 88dB to 91dB.
But if we run a DTS before SMPTE2000,will the XD10 compensate for this level,or should we actally lower the subw. level by 3dB
Alan

Posted by Michael Zarits (Member # 10747) on 02-23-2019, 06:24 AM:

Hi Alan,
There is no information on the disc's data if it is RP200 or not except the date when the files were created. I don't think the processor recognizes that to automatically to gain the LFE.

-Michael

Posted by Allan Lyman (Member # 9449) on 02-25-2019, 03:09 AM:

Hi Michael

thanks for the answer.

alan