This is topic Repair Source For PK60D Part in forum Film Handlers' Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=012423
Posted by Don Furr (Member # 1469) on 04-24-2019, 03:02 PM:
Seeking a source to send a power unit for reverse-scan (2 LED)device from a Kinoton PK60D for repair.
Any ideas?
Posted by Julian Antos (Member # 5497) on 04-24-2019, 04:57 PM:
I'd be curious about this too. I have a dead RSSD power supply in need of repair, but luckily had a spare so was able to swap out.
Out of curiousity, could one use a different type of power supply for these? I have quite a few spare Component Engineering supplies.
Posted by Don Furr (Member # 1469) on 04-24-2019, 05:10 PM:
Julian I think finding a different supply that would use the same connectors as the Kinoton would be impossible. Luckily I also had a spare that I was able to swap out. I'm hearing that these Kinoton PS have a history of failure.
Posted by Sam D. Chavez (Member # 1841) on 04-25-2019, 10:12 AM:
The LS 40 from CE is the best bet. Inexpensive last I looked. Got both LED and +/- 12 Volts power supply. On Phoenix connectors. Now you just have to read into the Kinoton wiring harness.
Posted by Don Furr (Member # 1469) on 04-25-2019, 03:23 PM:
Thanks Sam!!
Posted by Sean McKinnon (Member # 612) on 04-26-2019, 04:41 PM:
Boston Light And Sound has Kinoton LED power supplies available if one wanted a replacement
Posted by Don Furr (Member # 1469) on 04-26-2019, 06:53 PM:
Thanks Sean.
Posted by Mark Gulbrandsen (Member # 72) on 05-03-2019, 08:39 AM:
quote: Sean McKinnon
Boston Light And Sound has Kinoton LED power supplies available if one wanted a replacement
I seriously doubt Don that wants to have to cash in a 401K just to get a power supply. Almost any reverse scam power supply will work.
https://www.ebay.com/itm/COMPONENT-ENGINEERING-LS-40-PREAMP-POWER-SUPPLY/133003106171?hash=item1ef79a577b:g:e6gAAOSwpRRWnRsS
Powered by Infopop Corporation
UBB.classicTM
6.3.1.2