Film-Tech Forum ARCHIVE: Access set up of LCD projector and TV.

This is topic Access set up of LCD projector and TV. in forum The Afterlife at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=12;t=000139

Posted by Duncan Smith (Member # 1556) on 05-05-2003, 11:55 AM:

Hi there, I have a Sony TV which I can get into with the standard Sony remote sequence of buttons to adjust geometry etc but it won't allow me to adjust the blanking for some reason, any ideas? It's a KV32FX65E.

Also I have just bought a cheap Panasonic LCD projector and would like to be able to get into the set up menu's on that too so that I can adjust the image width and height etc. It's consumer style menu's allow me to position the image but not allow for under/overscan. Any help would be gratefully received. It is a PTAE100E.

All the best, Duncan. [thumbsup]

Posted by David Stambaugh (Member # 1102) on 05-05-2003, 11:59 AM:

This won't help you much, but on my 2 Sony TVs, I seem to recall that the blanking function had an odd name in the service menus. Maybe you're looking for the wrong thing. Unfortunately though I can't remember what it IS called... Anyway I was able to make adjustments to eliminate most of the overscan etc. if that's what you're trying to do.

Posted by Duncan Smith (Member # 1556) on 05-05-2003, 12:22 PM:

Hi David, you're right that is what I'm trying to adjust. If you remember what it was called drop me line. In the meantime I don't want to got through it all randomly trying different parameters in case I do some damage. Warranties don't cover this sort of thing eh? [Roll Eyes]

Thanks for the fast reply.