Film-Tech Forum ARCHIVE: 2000ZX problem

This is topic 2000ZX problem in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=000530

Posted by David Stone (Member # 4846) on 03-16-2010, 07:05 PM:

Hi Guys,

Every now and then a 2 foot green line will appear down the right hand side of the screen from top to bottom You can fix it by simply changing channels. Any suggestions on the cause.

Cheers,

David

Posted by Joe Elliott (Member # 4006) on 03-17-2010, 12:21 AM:

We had a similar problem with our barco. We were told it was a timing problem when previews, or other clips were not the same format, and a software upgrade fixed it. Check that your projector has the current software. May be your problem, may not, but it wouldn't hurt.

Posted by Alastair Comrie (Member # 4313) on 03-17-2010, 05:48 PM:

We had an annoying green flicker with our Christie, however changing channels didn't do anything. A software upgrade was necessary to fix it.

Posted by Michael Hossen (Member # 4274) on 03-21-2010, 05:59 AM:

We're having a green flicker problem with a NEC NC2000C. When changing between trailers. I'm assuming it needs a firmware update.

Posted by Steven C Y Chan (Member # 2967) on 03-22-2010, 02:55 AM:

Have you check the error count from the 2 HD-SDI? cases here solve by change TI-Board [Smile]

, some cause by a bad cable. [Frown]