Film-Tech Forum ARCHIVE: EX/7.1 cabling CP750

This is topic EX/7.1 cabling CP750 - DCM-10 in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=000675

Posted by Dave Macaulay (Member # 813) on 10-17-2010, 10:54 PM:

Anyone know a source for cables to connect a CP750 main output to a DCM10 monitor/crossover? The DCM has two DB25 inputs with 1:1 pinouts for the two cables required for EX when using a CP650EX or a CP500+SA10, so two flat cables and crimp-on DB25s are all you need. The CP750 has all 8 output channels on one connector with a revised pinout different in most every way from the old Dolby output pinout. It looks like I need a "Y" cable from the CP750 output to both DCM inputs. Is such a cable available or do I have to make it myself?

Posted by Samuel Hynds (Member # 2610) on 10-18-2010, 10:57 AM:

Those dual connector are for the CP650 with EX surrounds.

With the CP750 use a straight 25 pin connector and via the DCM 2010 manager software - select the USL/DTS processor.