Film-Tech Forum ARCHIVE: Projectors on single phase.

This is topic Projectors on single phase. in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=000855

Posted by Stephen Furley (Member # 1277) on 08-05-2011, 04:30 AM:

The system won't let me either edit the post which I made earlier today, or reply to it, so I've had to start another thread.

If three phase is a problem, and the screen size is small, then the NEC NC800C may be the answer; it is a single phase machine, at least the one which I used to run was, the whole digital setup, except for the Dolby DMA, ran from a 16 A BS EN 60309-1 (BS 4343) blue socket.

However, I believe the lamp costs are rather high on this machine, so that would have to be balanced against the cost of getting a three phase supply.

Posted by Peter Castle (Member # 1997) on 08-06-2011, 12:37 AM:

THe NEC1600 is also single phase but does require 30amps for the lamp power supply.