Film-Tech Forum ARCHIVE: (help) problem with dcpc!!!

This is topic (help) problem with dcpc!!! in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=000873

Posted by Robby Golosino (Member # 6325) on 09-02-2011, 09:05 PM:

hi all...please forgive my rudeness upon asking some help from you guys...i am new to this digital technology creation...i downloaded a software called DCPC from cinema.terminal-entry.de and followed its instructions but in step 2...i cannot click the selection tab for "2D" or either any of them and it says "some files are missing" which is in fact i downloaded it all...please help me of this one and i promise that if i have the chance to gain some knowledge from you,i'll be willing to help also to those who are in need someday...thank you very much sirs...

Posted by Monte L Fullmer (Member # 2797) on 09-02-2011, 09:11 PM:

Could be some compatibility issues with your server and that 3rd party program..which I wouldn't trust too much in the first place.

Posted by Carsten Kurz (Member # 5396) on 09-03-2011, 07:30 AM:

DCPC generated DCPs work on all servers. However, you have to install DCPC AND the ImageMagick package from the tools package before you can use DCPC.

http://cinema.terminal-entry.de/downloads/dcp-tools.rar

You can contact Lars through Email if you have further problems.

There is also a film-tech thread on DCPC and other DCP software:

http://www.film-tech.com/ubb/f16/t000539.html

- Carsten

Posted by Robby Golosino (Member # 6325) on 09-03-2011, 10:05 PM:

thank you very much sir Carsten and sir Monte ...your reply is very much highly appreciated...you are indeed a "film gods" that hears upon requests of your subordinates...i hope you wont get bored helping us...thank you sir.