Film-Tech Forum ARCHIVE: Dolby CP750 Problem

This is topic Dolby CP750 Problem in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=000899

Posted by Marcial Feliciano Ramos (Member # 1989) on 09-23-2011, 11:21 AM:

Hi, I manage to put the IP and everything in the CP and put the commands in the GDC server. Every cue funtions except the one to change the sound to Digital 1 but it funtions when changing to NonSync. What could be the problem. I have a CNA-10, GDC server and CP750. Thanks in advance.

Posted by Steve Guttag (Member # 268) on 09-23-2011, 01:13 PM:

I would verify the command syntax is correct...9 times out of 10 that is the problem. I have eCNA automations talking to CP750s without incident.

-Steve

Posted by Marcial Feliciano Ramos (Member # 1989) on 09-23-2011, 04:37 PM:

I was putting two cues together and for some reason it skipped one of them (Digital 1). I separated them by two seconds and worked fine. Thanks.