Film-Tech Forum ARCHIVE: mode 3D color between left eye and right eye should be the same or not.

This is topic mode 3D color between left eye and right eye should be the same or not. in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001000

Posted by Waiyawit Wiangchan (Member # 6518) on 01-17-2012, 09:19 AM:

I'm not sure your Barco dp2k-23b and dolby server Dss200 at your site, Is it a problem like me?

we tried to adjust and calibrate with color measurement(photo research)
many times and many ways but it is not the same color between left eye and right eye. it's feel right eye will brighter than left eye.

The Dolby server have a wizard step for setup and calibrate with color
patterns R G B and FL , we did it many times with color measurement(photo research) with 3D mirror filters R/L , It was easy to did calibrate
but it's still not the same color between left eye and right eye when we play the 3D movie content in Dolby server.

So, I was wondering about The color wheel filters maybe faulty or not, how to check that it's still color working?
Is there some 3D Color setting or preset in Barco Communicator software between left eye and right eye?
I'm not sure whether character of color wheel filters in Barco projector should be the same color left and right or not?

Posted by Carsten Kurz (Member # 5396) on 01-18-2012, 08:56 AM:

You should get a certified technician to do the initial calibration and show you the bits and pieces of the process.

- Carsten

Posted by Waiyawit Wiangchan (Member # 6518) on 01-19-2012, 12:58 AM:

I think i can do it with myself and I have a bit confuse.
Indeed I need to know about comparison of another site and the same model as me.

I can do calibrate 2D color and the color is the best for me.
I just have a problem with 3D color only.

Thanks for your suggest.