Film-Tech Forum ARCHIVE: cp2220 icpp error

This is topic cp2220 icpp error in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001008

Posted by Sanish Prabhakaran (Member # 6125) on 01-26-2012, 06:38 PM:

anybody can help me to solve problem in cp2220 showing error icptest fail.while playing showing bluish colour in the screen

Posted by Steve Guttag (Member # 268) on 01-26-2012, 08:35 PM:

If your ICP is running firmware 2.x.x...then your ICP is failing and needs to have the Christie ICP recovery package run. Then again, you may just have an ICP failure. Any DLP projector made in 2010 will have its ICP fail sooner or later.

-Steve

Posted by Sanish Prabhakaran (Member # 6125) on 01-30-2012, 01:53 PM:

THANKS STEAVE,
I HAVE 2 BARCODP2000 AND ONE CP2000ZX,SO YOU MEAN TO SAY SOON PROBLEM WILL REACH THAT PROJECOTORS ALSO?THERE ANY THING I CAN DO PREVENT THIS,UPDATING FIRMWARE WILL BE HELPFUL OR CAN YOU ADVICE ME SOMETHING TO RECOVER THIS.

Posted by Steve Guttag (Member # 268) on 01-30-2012, 09:36 PM:

The DP2000 and the CP2000ZX are series 1 projectors...they don't have the ICP so you need not worry about board corruption with them.

The ICP corruption issue is limited to Series 2 projectors made in 2010. By 2011, the ICP had advanced to version 3.0.314 and beyond. ICPs that start with version 3.x.x and beyond will not go corrupt. Those that start with version 2.x.x will...unless a recovery procedure is run that essentially reformats the board from scratch, which will wipe the corruption problem out. Please note, the procedures for this must be followed to the letter that are specific to each projector brand.

-Steve