Film-Tech Forum ARCHIVE: NEC1200C problem

This is topic NEC1200C problem in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001116

Posted by Tom Wienholt (Member # 1510) on 05-19-2012, 01:00 PM:

Upon power up this morning, the indicator lights on top of the projector are solid red and the LCD reads "Service Door Tamper" & "IMB: Service Door Tamper."

I removed all service doors and re-seated them and powered down/ powered up the projector several times. Warning message is still there and I cannot play any content. I am able to power on the lamp. Any ideas?

Posted by Richard May (Member # 2627) on 05-19-2012, 04:08 PM:

Power down the projector. After its powered down, reboot the server. As soon as the server starts to reboot, power up the projector.

Posted by Steve Guttag (Member # 268) on 05-19-2012, 07:01 PM:

If you get a service door tamper...you will HAVE to input the Service password via the keypad (not the software) to clear it.

Note, you can get a service door tamper from just turning the key on either side OR the lens cover so DON'T go "exploring." If a board gets removed...you'll get an even stricter tamper...marriage.

Posted by Tom Wienholt (Member # 1510) on 05-19-2012, 08:34 PM:

Logged in with the service password..problem solved. Thanks!