This is topic Convergence on NEC NC800 in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.


To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001171

---

Posted by William F Green (Member # 3192) on 08-01-2012, 05:41 AM:
 
Does anybody know how to adjust convergence on an NEC NC800?
There may be a mode we don't have access to. We have access to 'service' & 'installation' modes but I notice there is also an 'advanced user' mode which is greyed-out.
Help would be appreciated.
 

---

Powered by Infopop Corporation
UBB.classic^TM 6.3.1.2