This is topic Dolby CP750 Setup Software for Windows 8 in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.
To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001277
Posted by Jeremy Weigel (Member # 4208) on 11-16-2012, 12:51 AM:
Does anyone know if Dolby has released a Windows 8 fully compatible version of the CP750 Setup software?
Posted by Steve Guttag (Member # 268) on 11-16-2012, 12:39 PM:
Dolby has not posted anything yet...I'll wager it isn't high on their priority list, at this time.
Posted by System Notices (Member # 2357) on 02-25-2015, 06:40 AM:
It has been 830 days since the last post.
Posted by Kore Pendragon (Member # 6361) on 02-25-2015, 06:40 AM:
I can't get windows 8 to connect via USB at all. I think it's something to do with the drivers.
Posted by Jim Cassedy (Member # 4115) on 02-25-2015, 10:52 AM:
The only way I've seen someone access a CP-750 using Windows 8 is by connecting
through another computer equipped with Team-Viewer or some other remote access
computer software. FOR EXAMPLE:
>Your TMS is running the cp-750 set-up software and also Team Viewer or similar
> You remotely connect to the TMS with your Windows 8 machine using Team
Viewer or other remote access software.
>You acccess the CP-750 set-up software on your TMS and control it remotely
using your Windows 8 computer.
Cumbersome, perhaps, but it works.
Posted by Marco Giustini (Member # 4544) on 02-25-2015, 02:49 PM:
it works, you just have to tell windows 8 to accept non signed drivers. It was a matter of pushing a button with Windows 7, it is now unbelievably complicated with Windows 8. It may be better with Windows 8.1 - not sure.
Dolby have an instruction sheet for that.