Film-Tech Forum ARCHIVE: Dolby DSS200 Volume Cue Errors

This is topic Dolby DSS200 Volume Cue Errors in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001526

Posted by Manny Knowles (Member # 1171) on 06-08-2013, 09:43 AM:

My DSS200 seems to have a glitch -- if I create a volume cue of 4.0, it actually notes it as a 3.9 volume and then I have to re-edit it, sometimes a few times to get it to "stick."

This doesn't go away after a reboot.

I think I'm running 4.3.5 (13) software.

Is this happening to anyone else??

Posted by Gavin Lewarne (Member # 5397) on 06-08-2013, 10:23 AM:

On 4.5.4 here it isn't

Posted by Ross McLaughlin (Member # 6774) on 06-08-2013, 04:45 PM:

I used to have that all the time - all technician suggested was that I set the volume .1 higher than needed and it would often set it to what was needed. Don't get it anymore, I think we're now running 4.5.4 but maybe we weren't then.