Film-Tech Forum ARCHIVE: Proyecson PA 29+ automation

This is topic Proyecson PA 29+ automation in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001583

Posted by Nerijus Marmokas (Member # 6712) on 07-30-2013, 05:13 AM:

Hi,

Does any of you guys use Proyecson PA29+ automation device?
We have couple of these and I need to configure their impulse durations, which can be done via Ethernet cable and PC, but I don't have login and Pass.
I have a login and password for newer (I presume)PA20+, which I successfully configured to fulfill my needs, but I can't sleep at night until I can login to that PA29+.

Regards,

Posted by Nerijus Marmokas (Member # 6712) on 09-02-2013, 02:54 PM:

Yeah, I figure everyone found a better solution than using Proyecson [Smile]

Posted by Dave Macaulay (Member # 813) on 09-03-2013, 03:00 PM:

You must be getting pretty drowsy by now.

Posted by Gordon McLeod (Member # 33) on 09-03-2013, 08:33 PM:

we were contacted about selling it i can see no advantage to it compared to what we make or is already on the market