Film-Tech Forum ARCHIVE: How can srt up Automation Cue for chritie ACT with CP650 by RS-232

This is topic How can srt up Automation Cue for chritie ACT with CP650 by RS-232 in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001691

Posted by Nguyen Jack (Member # 7530) on 11-11-2013, 02:34 AM:

Hi Everybody,

I used Christie Solaria One, i want set up cue Automation Audio by Christie ACT by RS-232.
How can connect it ? Please help ?

Thanks.

Posted by Stefan Vogels (Member # 5573) on 11-11-2013, 10:24 AM:

To what type of audioprocessor you want to send it ?

Posted by Stefan Vogels (Member # 5573) on 11-11-2013, 04:41 PM:

Ah sorry it is in the title [Roll Eyes]

The Christie ONE has standard automation for Ethernet control of the CP650 on board!

All macro's and all standard preset, just add it as device.

Posted by Nguyen Jack (Member # 7530) on 11-12-2013, 12:59 AM:

Thanks Stefan Vogels,

I see marco, but i can't control button. I just control level.

Ex: Run script'DIGITAL' -> Not run.
Run script'NONSYN' -> Not run.

Please help me.

Posted by Stefan Vogels (Member # 5573) on 11-13-2013, 12:49 PM:

I believe it sends commands for buttons, so button 0 till 7,
with 0 being top left button ( 01 ), button 4 is 11 on the CP650 which usely is connected to the IMB, it is 6 channel external unless you have a cat790 and used a different button. Button selection should be standard in the christie IMB software on the latest release.

best,
Stefan