Film-Tech Forum ARCHIVE: Doremi " SW integrity check failed"

This is topic Doremi " SW integrity check failed" in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001711

Posted by Torsten Juergens (Member # 7916) on 11-27-2013, 10:09 AM:

Hi

For some reason, my Doremi 2k4 is starting up almost every 2 nd time with a „software integrity check failed“

SW 2.2.5-0, sbc405-2.0.17-0, fw_dci-21_03s-1_S1

I replaced the internal usb flash already 3 times without any visible success.

Only in this special case it falls into the „sm rescue mode“ , then it shows SM 2.0.8-0 instead of SM 2.0.17-0, and i am not able to start a show.

It comes up like this almost about 2 years without any problems.
But after the latest updates I can not ignore it anymore.

My workaround is just a reboot and then it works all fine again.

Why does my Doremi has such a behavior?
What can I do to fix it ?

Thanks in advance
Torsten

Posted by Danial Simmonds (Member # 4638) on 11-27-2013, 02:09 PM:

I experienced that error before, but not with the 2K4, only with the ShowVault + IMB and TMS so far but only 2 or 3 units out of the hundreds, normally we reinstall the software step by step, Software - SM - Firmware then everything becomes normal again.

But you might want to contact Doremi support, the guys there responds fast and are helpful.

Posted by Dave Macaulay (Member # 813) on 11-27-2013, 03:27 PM:

For one thing, the system checks at boot that all the files in the original software package are present. If something is missing, maybe even if a file is changed, you get that error. I deleted some device cueslib files for stuff we never use and the error started coming up. If you send a server diags package to support@dorecinema.com they will tell you what the problem is. Generally reinstalling the main software will fix it.

Posted by Torsten Juergens (Member # 7916) on 11-28-2013, 01:04 AM:

OK, thanks for your advices.

First of all I will contact Doremi support, send the diags pkg and reinstall the main software.
I will let you know if it works.

Posted by Marco Giustini (Member # 4544) on 11-28-2013, 04:36 AM:

I think the email is @doremicinema.com

Posted by Dave Macaulay (Member # 813) on 11-28-2013, 07:01 PM:

oops!

Posted by Torsten Juergens (Member # 7916) on 12-12-2013, 02:23 PM:

It works again.
Thank you for your suggestions.
The uboot DLM was not OK, doremi made a new one and there was a SM version mix on the server.
With the doremi recovery process I got it out of the „Rescue Mode“ and reinstalled all of the latest software again step by step.

Torsten