Film-Tech Forum ARCHIVE: Re-Setting NEC 2000C Door Tamper Alarm?

This is topic Re-Setting NEC 2000C Door Tamper Alarm? in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001723

Posted by Jim Cassedy (Member # 4115) on 12-08-2013, 06:35 PM:

We took the side panel door off of an NEC 2000C to check a possible problem.
Now that everything is back together, the NEC has a "Service Door Tamper alarm
that needs to be re-set.
I know I've seen it done once before, but I don't remember the proceedure.

Does anyone know how to re-set the door alarm?

I know we can't post passwords,etc online here, so pleas PM me if you know how.

The projector is at a small private screening room, without a NOC.

Posted by Mark Gulbrandsen (Member # 72) on 12-08-2013, 06:46 PM:

Check your in box

Posted by Justin Hamaker (Member # 2165) on 12-08-2013, 07:41 PM:

Press and hold "Menu" until it asks for password, then enter the service password and press "Enter".