Film-Tech Forum ARCHIVE: 3D 47 Ronin ghosting issues

This is topic 3D 47 Ronin ghosting issues in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001752

Posted by Michael Hickl (Member # 7585) on 01-03-2014, 01:47 PM:

We are having problems with 3D 47 Ronin here at my theater where the image seems to ghost during action scenes or darker scenes. In some instances you can actually make out the green and pink color of the polarization. We are running Sony SRX-320 and SRX515 with RealD 3D lenses. It is really noticeable on the 515 in the small theater. I mainly want to know if other theaters are experiencing this same problem with this movie title. I just watched 3D hobbit and it looked fine.

Posted by Dominic Espinosa (Member # 2122) on 01-16-2014, 04:30 AM:

If you haven't already, you may want to look into your convergence adjustment. Toss up the convergence test pattern and check for alignment. The cyan and yellow lines should line up perfectly across the entire screen.
Typically you might see the right lens flaring out or inward from the left lens at the edges. This can only be adjusted through SRX controller permanently however the super login (if you have access) can make small changes on a per-show basis to get you by.

Also check to see if ghostbuster is enabled/disabled and whether this is correct for the title.