Film-Tech Forum ARCHIVE: Lense Setting NC1200C

This is topic Lense Setting NC1200C in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001909

Posted by Paul Maxon (Member # 6211) on 05-17-2014, 04:17 PM:

I usually work on barco projectors and setting the Macros with the appropriate files is pretty straight forward.

I know how to crop a NEC screen file if the lens zoom/shift setting is correct for the screen size and the screen file just needs tweaked for slight changes is masking ect.

I look briefly for a "Lense Setting" to set the zoom/shift to put into a macro(I have one projector that is off a little) but I could not find how to save the setting or insert into the Macro.

Could anyone tell me what its under and how to put it into the appropriate macro?

Thanks

Paul

Posted by Justin Hamaker (Member # 2165) on 05-17-2014, 04:40 PM:

Using the DCC Software, log in to service mode and go to the Lens tab. Set your zoom, shift, focus as desired, then go to Memory List. Select an unused slot and hit Entry. Enter the name for your lens file (Scope, Flat, etc). Then you need to go to the Title tab, and select the format you want to edit. Click Advance, then Lens Memory, and select the lens file you just created. Finally, click the Store As button and select the format you want to save (it should already have the one you want selected).

Posted by Paul Maxon (Member # 6211) on 05-17-2014, 06:50 PM:

Thank You!

On the NEC software they seem to hide some of the important stuff that I think should be easily accessible. Maybe Im just too used to the Barcos I usually work on.