Film-Tech Forum ARCHIVE: Re-setting IP Address on Sony SRX-R110?

This is topic Re-setting IP Address on Sony SRX-R110? in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001927

Posted by Chris Rasmussen (Member # 3015) on 06-04-2014, 11:59 AM:

Greetings!

If you're reading this post, I hope and trust you'll know the easy answer for this! It can't be that difficult, right? I've got the SRX Controller app and have poured over Installation, Service and Settings with no luck. Hours of inquiry with Sony tech support yielded no results - their current techs have no training with the "old" stuff.

The projector has an assigned IP that remained with it for months of none use and no power, so the standard of pulling power and hoping it would forget doesn't work. It's been relocated to another cinema and needs to adopt their IP.

Thanks!

Chris ~

Posted by Carsten Kurz (Member # 5396) on 06-04-2014, 03:32 PM:

http://pro.sony.com/bbsccms/assets/files/micro/sxrd/manuals/SRX-T110_T105_Install_Manual.pdf

Page 21 - Network

- Carsten