Film-Tech Forum ARCHIVE: CP650 and CP750 power connection

This is topic CP650 and CP750 power connection in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001940

Posted by Mike Moreno (Member # 4887) on 06-18-2014, 02:44 PM:

Hello guys.

i have just install a few 220V UPS in a couple of BARCO projectors, they just have 220V output on wich I only connect the GDC PSD and of course the electronics from the equipment but i wonder if i can plug also a CP650 or CP750 in to this UPS.
i read on the back of the procesors 120-240V but i just wanna make sure that they really can work at 220Vac. right now they are working at 120Vac.
thanks for your help.

mike Moreno
Mexico

Posted by Sam D. Chavez (Member # 1841) on 06-18-2014, 05:59 PM:

There is a 110/220 switch on the top of the 650 but it has only to do with the bypass power. The bypass fuse inside should be changed to the correct value but the 650 will detect and run fine on 220 even if you do not change the fuse.

750 also senses 110 or 220 and runs fine.

Posted by Mike Moreno (Member # 4887) on 06-21-2014, 02:12 PM:

thanks a lot Sam [thumbsup]