Film-Tech Forum ARCHIVE: GPIO and automation cues pin out

This is topic GPIO and automation cues pin out in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001977

Posted by Hakan Bicer (Member # 7471) on 07-20-2014, 09:34 AM:

Hi all ;

is there any one knows to DSS 200 / 220 and sony SRX 515 servers
GPIO and automation cues pin out diagram ?

thanks all

Posted by Carsten Kurz (Member # 5396) on 07-20-2014, 10:40 AM:

I think the server-side GPIOs on the DSS200 out of the box can only be used for failsafe and basic transport functions. Only the serial interface is 'free to use'.

The full DSS200 GPIO pinout can be found in the Dolby Digital Cinema installation manual. There is also a section on XML setting the input/output characteristics of the GPIOs in the Appendix.

The Sony 515 pinout and programming can be found in the SRX-R515 installation manual.

If you don't find these manuals, drop me a personal message.

- Carsten

Posted by James Crowley (Member # 7299) on 07-20-2014, 10:47 AM:

I use GPIO to automate an NC3240 and to automate lighting using gpio to relays then onwards. You just need the pin diagram from the instructions and to write the XML code for the cues

Posted by Hakan Bicer (Member # 7471) on 07-20-2014, 11:40 AM:

Thanks all , I have instalation manuel of dolby servers but I dont have sony srx series server and projector instalation manuel [Frown]

I want to just simple control relay unit for teather light on and off in adition afew another control