Film-Tech Forum ARCHIVE: Edge of Tomorrow

This is topic Edge of Tomorrow - Any problems? in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=001990

Posted by Harold Hallikainen (Member # 5405) on 08-06-2014, 11:42 AM:

We are trying to chase down an issue where a customer reports VI audio coming from a surround speaker. They are saying it is ONLY for this movie. Has anyone else seen an issue with this? I suspect the movie is fine, but thought I'd check.

Thanks!

Harold

Posted by Frank Cox (Member # 6258) on 08-06-2014, 11:51 AM:

I played that movie a while back with no issues. I have a JSD100 processor and a 5.1 setup.

Posted by Jason Raftery (Member # 6291) on 08-06-2014, 11:55 AM:

I, too, have played that title without issue on GDCs with CP750 or CP650 processors and IRC-28C emitters. Sounds like a server channel mapping issue as Edge of Tomorrow has 16 channels of audio while most other titles are encoded with less.

Posted by Harold Hallikainen (Member # 5405) on 08-06-2014, 12:06 PM:

THANKS!

Harold

Posted by Mark Gulbrandsen (Member # 72) on 08-06-2014, 01:04 PM:

I have had this happen twice with a GDC 2000AR server feeding a JSD-60. Two different films too. I just go into the audio mapping of the GDC and turn those channels off, 7&8. My instance of this was at drive in and narration came through left channel (may have been left surround though), on another movie it came through right channel (probably Right Surround).

Mark