Film-Tech Forum ARCHIVE: NEC NC900 software

This is topic NEC NC900 software in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=002031

Posted by Richard May (Member # 2627) on 09-20-2014, 07:24 PM:

Does anyone know what the latest software and firmware version are?

Posted by Steve Guttag (Member # 268) on 09-20-2014, 07:52 PM:

Yes. Absolutely. I do!

Posted by Richard May (Member # 2627) on 09-20-2014, 08:02 PM:

Hmmmm. Could you possibly tell me Steve.. [Smile]

Posted by Steve Guttag (Member # 268) on 09-20-2014, 08:02 PM:

Sure...but that isn't what you asked!

The firmware is 4.214 and the DCC software is 5.0.9.0

Posted by Richard May (Member # 2627) on 09-20-2014, 08:09 PM:

Thanks Steve. On the digital readiness form for Technicolor, what would the projector software version be?

Posted by Steve Guttag (Member # 268) on 09-20-2014, 08:16 PM:

Just use the 4.214 one. That is all they really need and they don't really need that. Beyond knowing that your system is DCI compliant, there is nothing else that should be important.

That is actually package number...there are quite a few subsystems in the projector. The actual projector firmware number in that package is 2.800...but who cares about that? It is all encased in the 4.214 package.

Mostly, these people are data mining and for the most part, it is stupid. If you think about it...this sort of software is very temporary so whatever you tell them now will be different within 6 months to a year.

Posted by Richard May (Member # 2627) on 09-20-2014, 08:19 PM:

Thank you Steve