Film-Tech Forum ARCHIVE: dts xd10p cinema audio processor Failure

This is topic dts xd10p cinema audio processor Failure in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=002167

Posted by Adam Sherwood (Member # 7802) on 01-06-2015, 02:02 PM:

Hi.

I have just recently had a xd10p fail on me, for a while its been randomly swapping from ext2 to non syn during the film, every now and then all the sound channels ext 2 etc would start flashing and and all u would hear is a buzzing noice. the tech guys gave some help with what to try for a while , it looks as if one of the cards is failing. turning it off and on would fix it, then did a re boot of the unit and this helped stop the swapping of the chaneles then the whole unit started flassshing again last week it kept happening 3-4 before a show was due on no matter what i tried was unable to keep it from happening every 20 min. coudnt run shows like this was too busy with what films were in that screen , we were already in the middle of ordering a new unit. so we lost a screen for a few days, thankfully we were able to move some films to another screen. we have gotten a dolby cp750 insllalled yesterday.. its a lovely unit. im wondering does anyone now of anywhere that repairs the dts xd10p's units or is it even possible to get them repaired we have a few of these still, i know these units are not around much these days so im guessing no or any place to get new cards. it would be nice to have this as a back up unit.

Posted by Clint Koch (Member # 1179) on 01-06-2015, 02:57 PM:

USL, Inc. built these units for DTS and can still help you out with them. www.uslinc.com