Film-Tech Forum ARCHIVE: NEC NC900 channel selection

This is topic NEC NC900 channel selection in forum Digital Cinema Forum at Film-Tech Forum ARCHIVE.

To visit this topic, use this URL:
https://ft-forum.com/ft/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=16;t=002347

Posted by Richard May (Member # 2627) on 06-26-2015, 08:25 PM:

I have 4 of these projectors all with Doremi IMS1000's and all 4 are doing the same thing. Maybe I'm missing something. All of the macros work controlling various projector functions except switching channels. I have to select Flat or Scope from the projector itself. Any ideas?

Posted by Steve Guttag (Member # 268) on 06-26-2015, 11:30 PM:

When you select the "preset" on the NEC from the IMS1000, you are actually selecting the TITLE number, not the preset button number on the projector. Have your confirmed that the Title number isn't changing to the one you've selected?

Posted by Marco Giustini (Member # 4544) on 06-27-2015, 04:46 AM:

As Steve said, you're calling the title number. It is very possible that your FLAT is assigned to button 1 but it's in fact Title number 25.

Posted by Richard May (Member # 2627) on 06-29-2015, 08:43 AM:

Thanks guys. I'll check that when I go back there. I did have it selecting preset 1 and 2 which is flat and scope. Maybe nothing was assigned to "title" 1 and 2 which is why there was no change?

Posted by Marco Giustini (Member # 4544) on 06-29-2015, 02:19 PM:

Correct. More likely Title 1 and 2 are still factory default.